MIL-STD-130M Change 1 :: APPLICABLE DOCUMENTS



2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in sections 3, 4, and 5 of this standard, whether or not they are listed.

2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

SPECIFICATIONS
FEDERAL
A-A-208                   Ink, Marking, Stencil, Opaque (Porous and Nonporous Surfaces)
A-A-56032               Ink, Marking, Epoxy Base

DEPARTMENT OF DEFENSE
MIL-DTL-15024      Plates, Tags and Bands for Identification of Equipment
MIL-DTL-31000      Technical Data Packages

STANDARDS
DEPARTMENT OF DEFENSE
MIL-STD-1686       Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and                               Equipment (Excluding Electrically Initiated Explosive Devices)
MIL-STD-129         Military Marking For Shipment and Storage

HANDBOOKS
DEPARTMENT OF DEFENSE
MIL-HDBK-263       Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and                               Equipment (Excluding Electrically Initiated Explosive Devices) (Metric)
MIL-HDBK-1812     Type Designation, Assignment and Method for Obtaining.
(Copies of these documents are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation or contract.

<<Previous  |   Next >>